Wiper Switches

LarMer · Post by **LarMer** » Thu Aug 13, 2015 5:50 pm

One of my 3 wipers stopped. It's switch is bad. The switch is one of three in a dedicated switch assembly that includes fuses for each switch. In the course of diagnosing the problem I damaged the switch assembly and would like to replace it. I have not been able to find a similar part. I may need to buy 3 separate toggles and fit fuses in the lines, but it would be easier to replace the existing assembly. I've attached a photo of the assembly. It has 3 toggle switches and 3 fuse holders, separated by a metal box. In addition to the primary wires, both the switches and the fuses have smaller wires that connect to this metal box. I don't know what the function of this box is nor whether it is really needed. Anyone have any idea where I can find a replacement, or any suggestions for a work around?

Post by **Mike Ebert** » Wed Aug 19, 2015 5:33 pm

John, you might want to look at this thread to see if it matches yours.

Good luck.

viewtopic.php?f=7&t=5528

Post by **catalina_mike** » Thu Aug 20, 2015 11:30 am

Get switches from these guys and cut a starboard back plate.
https://rockerswitchpros.com/

LarMer · Post by **LarMer** » Fri Aug 21, 2015 2:52 pm

Thanks Mike. I'll check out that site.

Post by **catalina_mike** » Sat Aug 22, 2015 4:23 pm

Saw these this morning. The fuse is already installed..

http://www.westmarine.com/buy/blue-sea- ... 73_003_512

Albin Owners Group

Albin Owners Group

Wiper Switches

Wiper Switches

Re: Wiper Switches

Re: Wiper Switches

Re: Wiper Switches

Re: Wiper Switches