OK I am using the documentation in the document area as a basis for my question and the fact I have three bilge switches on the helm 12 vdc panel. I can only find the forward bilge pump, the diaphragm bilge pump starboard side mid ship. I can not find the aft one and only two of the three switches do anything?
Does anyone have a vessel without the aft pump?
Thanks and repairs are underway for my new baby...
I didn't see my original post show up from earlier tonight so if two show up I apologize...
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Bilge Pump Locations
-
catalina_mike
- Gold Member
- Posts: 719
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Bilge Pump Locations
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Bilge Pump Locations
The third in my 28 and now on the 31 both are mounted just aft of the rudder post. That rear pump is fantastic for removing any standing water that accumulates forward once up on plane by manually flipping the rear bilge switch. If it's not there, I would bet that the previous owner pulled it out. Look for wires and get one installed. A 2000gph is what was there.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13