I figure someone here with more experience than I will know ... I have a couple of Mustang inflatable suspenders. They are coming up on 3 yrs old. What is the lifespan on the CO2 cylinders?
Has anyone changed out a cylinder that hasn't been fired? I'm thinking if I unscrew this thing it's going to fire off like a missile.
I know I should RTFM but that's not handy and the keyboard is.
Jack
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Question on inflatable vests
- JackK
- Gold Member
- Posts: 465
- Joined: Fri Jun 30, 2006 8:14 am
- Home Port: Portsmouth, Rhode Island
- Location: Plainville, MA
Question on inflatable vests
former boat .. 2003 28 TE Flushdeck Dogonit
-
- Gold Member
- Posts: 411
- Joined: Mon Apr 17, 2006 1:40 pm
- Home Port: Boston, MA
- Location: Boston
- Contact:
CO2
I am not an expert but on my diving BCs the CO2 cartridges just unscew - - even if they have not been fired. They do not fire unless you pull a cord that then pierces the top. Unless there'a ton of corrosion, you shouldn't have any concerns.
Rick
Rick
Rick
1998 Albin 35TE
"Legacy"
1998 Albin 35TE
"Legacy"
- Mariner
- Gold Member
- Posts: 1450
- Joined: Mon Apr 17, 2006 11:18 am
- Location: Gig Harbor, WA
The cylinders won't fire when you remove them. The firing mechanism is a pin that pierces the end of the cylinder. This does not happen until you pull the cord.
As for the age, I wouldn't worry about it. It is a good idea, however, to pull the cylinder annually and inspect it for corrosion or damage. Unless you find either of the above, I wouldn't bother replacing it. If you do, go ahead and re-install it. Then don the vest and give it a test fire so you can familiarize yourself with how it works. Then re-pack it, and replace the cylinder with a new one.
As for the age, I wouldn't worry about it. It is a good idea, however, to pull the cylinder annually and inspect it for corrosion or damage. Unless you find either of the above, I wouldn't bother replacing it. If you do, go ahead and re-install it. Then don the vest and give it a test fire so you can familiarize yourself with how it works. Then re-pack it, and replace the cylinder with a new one.
-
- Gold Member
- Posts: 82
- Joined: Mon Jan 15, 2007 1:36 pm
- Location: Flowery Branch, GA
- JackK
- Gold Member
- Posts: 465
- Joined: Fri Jun 30, 2006 8:14 am
- Home Port: Portsmouth, Rhode Island
- Location: Plainville, MA
-
- Mate
- Posts: 15
- Joined: Mon Dec 25, 2006 4:48 pm
A suggestion. I was replacing my CO2. Decided to test the vests before I changed them out. 2 out of the 3 Mustangs didn't hold the air for more than 5 min. When I called them they did not respond. I don't use them now (they look nice hanging in my office closet). If you still have the old co's you may want to try the same test. They should be easy to repack...if they work.