I lost a cap for my holding tank vent. My dock line might have popped it off. It says Attwood on it but I don't see a similar cap at their on-line web site or on Defender. Does anyone know where I can get a replacement? See photo.
Thanks.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
air vent cap
Moderator: Jeremyvmd
-
Jack
- Gold Member
- Posts: 192
- Joined: Fri Sep 10, 2010 2:01 pm
- Home Port: Essex CT
air vent cap
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
irishwake
- Gold Member
- Posts: 174
- Joined: Wed Aug 09, 2006 8:32 am
- Home Port: Pensacola, Florida
Re: air vent cap
I had the same problem on another boat I owned. Call Attwood they will send you a replacement.
-
joreyn
- Gold Member
- Posts: 322
- Joined: Mon Aug 18, 2008 4:56 pm
- Home Port: Port Ludlow, WA
- Location: Port Ludlow, WA
Re: air vent cap
It's part # 66419. You might be able to get the cap only from Attwood. Or you can get the "90 degree P-Trap Vent with Stainless Cap" from West Marine (or whoever). This might be the better way to go, as you'll most likely need the black plastic screw that holds the cap on. It's the plastic bit in the middle of the stainless cap.
That screw must have vibrated loose on my boat. Don't think it was a mooring line, unless the screw was already very loose.
http://www.attwoodmarine.com/store/prod ... -Tank-Vent Click on image # 4.
That screw must have vibrated loose on my boat. Don't think it was a mooring line, unless the screw was already very loose.
http://www.attwoodmarine.com/store/prod ... -Tank-Vent Click on image # 4.
Blue Moon
1999 36 Express Trawler
1999 36 Express Trawler