• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Engine Louvres for 36 classic
-
bioty
- Swabby
- Posts: 1
- Joined: Wed May 01, 2013 11:00 am
- Home Port: east greenwich, RI
Engine Louvres for 36 classic
Looking to replace the white plastic louvres on my 36 classic trawler. Any ideas where to find them?
-
Gunny
- Gold Member
- Posts: 74
- Joined: Wed Jan 27, 2010 5:41 pm
- Home Port: Charleston, SC
- Location: Reside in Spartanburg, SC
Re: Engine Louvres for 36 classic
My Albin 34 vents are plastic. West Marine had them and really inexpensive. I think around eight or nine dollars a piece. 
The fun was where the water traps are attached to. On my boat it was screws on some wire or others . Only about 1 1/2 hour job. Have fun.
The fun was where the water traps are attached to. On my boat it was screws on some wire or others . Only about 1 1/2 hour job. Have fun.