• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Badly Damaged Rudder
Moderator: Jeremyvmd
-
JKISP
- Gold Member
- Posts: 15
- Joined: Sat Sep 11, 2010 7:44 pm
- Home Port: Melbourne, FL
Badly Damaged Rudder
Rudder Post is bent and the rudder ( looks like copper) is twisted. The yard thinks they can repair the rudder but I would like to replace it. The part number on it is slightly obscured by the damage but looks like MH ? 24032 where the ? represents a number I can not read because of damage. Anybody got contacts to find a new rudder?
JKISP
"Island Belle" 2003 28TE, 6LP, Hull # 586
Manatee Cove Marina, Patrick AFB
"Island Belle" 2003 28TE, 6LP, Hull # 586
Manatee Cove Marina, Patrick AFB
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Badly Damaged Rudder
Your rudder is cast bronze with stainless shaft and pintle. Here is a link to Buck Algonquin for replacement rudders.http://www.buckalgonquin.com/pages/Prod ... _page.html
H&H Prop Shop in Salem, MA is a Buck dealer and provided the running gear to Albin for the 28's of your era. They have all the info and part numbers. The rudder for the flush deck is the same rudder as the engine box, but significantly ground down. Call them for knowledgable service. http://www.hhprop.com/ Bob Pellitier is one of the owners. Tell him you found him through AOG.
H&H Prop Shop in Salem, MA is a Buck dealer and provided the running gear to Albin for the 28's of your era. They have all the info and part numbers. The rudder for the flush deck is the same rudder as the engine box, but significantly ground down. Call them for knowledgable service. http://www.hhprop.com/ Bob Pellitier is one of the owners. Tell him you found him through AOG.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13