Good morning,
While my NSC was moored over the winter the colored layer of gel coat contacting one of the bumpers erroded away in a few small patches. What would the best way to repair this?
Regards,
yhc
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
gel coat repair
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 74
- Joined: Mon Oct 19, 2009 1:50 am
- Home Port: Whittier, AK
- DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: gel coat repair
There's a pretty good article by Don Casey on the BoatUS site.
http://www.boatus.com/boattech/casey/02.htm
I watched a guy doing some repairs on one of my hatches that had to be cut for the generator install, the write-up in the article seemed to hit all of the major points and had some good suggestions on the color match.
There's also a gel coat repair how-to video at Jamestown Distributors - I couldn't get the video link to work directly but the following page should include it.
http://www.jamestowndistributors.com/us ... repair_kit
Let us know how it goes!
http://www.boatus.com/boattech/casey/02.htm
I watched a guy doing some repairs on one of my hatches that had to be cut for the generator install, the write-up in the article seemed to hit all of the major points and had some good suggestions on the color match.
There's also a gel coat repair how-to video at Jamestown Distributors - I couldn't get the video link to work directly but the following page should include it.
http://www.jamestowndistributors.com/us ... repair_kit
Let us know how it goes!
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
- Gold Member
- Posts: 74
- Joined: Mon Oct 19, 2009 1:50 am
- Home Port: Whittier, AK
Re: gel coat repair
Thanks for the info Doug...I will report back when I get the work done this summer.
Regards,
Regards,