Rod Holder Gadget - 31 TE

[Cliff Deinert]

I am trying to find a source of supply for the Gadget in attached photo. There are 4 on the boat and are meant to store long fishing rods in the cockpit area by allowing the rod handle to extend thru these gadgets into the boat. Kind of tough to describe. See photo.

[lpbp]

Good post .I would also be interested in what you find for suppliers

[jcollins]

Hi Guys,
They are called grommets to the best of my knowledge. Check this post.

viewtopic.php?f=5&t=3388&p=24516&hilit= ... der#p24516

[RobS]

Rod Grommets they are. I replaced mine from Marine East this winter. Exact replacements, screw holes and all..

[Cliff Deinert]

Many thanks to RobS...
They are GROMMET POLE HOLDERS and are available at www.MarineEast.com, ph 219-362-7463. Rob you just saved me $100+ as I was getting ready to have my broken versions turned & milled by my local machine shop. Thanks again.
Cliff

[RobS]

Many thanks to RobS...
Cliff

No problem, that's what this site is all about..

Rob you just saved me $100+ as I was getting ready to have my broken versions turned & milled by my local machine shop. Thanks again.
Cliff

Great to see someone willing to go above and beyond to take care of their boat, unfortunately there are so many out there that don't get the same TLC

[skip2dornoch1]

Thank you!!! Just learning my way around the site! Saw a post but not the source for the grommets
Thanks very much for the direction
All the best
Skip

[REBMystic]

Thank you!!! Just learning my way around the site! Saw a post but not the source for the grommets
Thanks very much for the direction
All the best
Skip

Also - I have a glutton for unnecessary projects and ended up 3D printing new ones last year. I can share the design if for some reason MarineEast does not do 'em anymore.