Good evening,
My Raymarine dealer just had a transducer installed on my boat (40'NSC) and sent me the thru hull cut out. Looking at the cut out it is about 1~ 1 1/8" solid fiberglass. I got curious and wanted to ask all of you what your boat hull thicknesses are?
Regards,
yhc
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Hull thickness
-
yhc
- Gold Member
- Posts: 74
- Joined: Mon Oct 19, 2009 1:50 am
- Home Port: Whittier, AK
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Hull thickness
Same thickness on my 28 .... "dry" cored hull spring of '09.yhc wrote:Good evening,
My Raymarine dealer just had a transducer installed on my boat (40'NSC) and sent me the thru hull cut out. Looking at the cut out it is about 1~ 1 1/8" solid fiberglass. I got curious and wanted to ask all of you what your boat hull thicknesses are?
Regards,
yhc
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
jleonard
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: Hull thickness
Mine too depending on where in the hull you measure. (pun intended 
)
)Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT