We purchased a 1998 Albin 28n this past Summer!!! There are a mid and forward pump installed (none on Automatic)!!! I think there is wiring Aft for another pump (am I correct)? Over this Winter I would like to get the proper pump(s) installed!!!
Any suggestions would be appreciated...
Wilkie
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Bilge Pump(s)???
-
Wilkie
- Gold Member
- Posts: 19
- Joined: Thu Mar 22, 2018 10:30 am
- Home Port: Swansea, MA.
- Location: Swansea, MA
-
catalina_mike
- Gold Member
- Posts: 743
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Bilge Pump(s)???
Our 99 had the mid pump that had a separate switch as it was the diaphragm pump (not a pump with built in switch). The wiring was there to add the stern pump and I did.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal