• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Trim tab actuator
Moderator: Jeremyvmd
-
Jkraft
- Gold Member
- Posts: 551
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Trim tab actuator
Hi all I’m in a jam. I went to take the boat out and noticed I had one tab not working. When I came back I see why, the actuator is no longer hooked to the trim tab. The anode and the bolts are gone. The bolts go into the threaded plastic on the actuator. The plastic is stripped. There is no room to get a nut on the back side. The boat is in the water and is want to use it. Is my only option to replace the actuator assemblies and a haul out? Any temporary fixes?
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”