• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
ZF trans filter
-
Slackwater
- Deckhand
- Posts: 5
- Joined: Wed Sep 20, 2023 10:51 pm
- Home Port: Rock Hall, MD
ZF trans filter
I have a 2004 31TE with the 6CTA 450hp engine and ZF280 1A trans. I want to change the trans fluid and clean the filter at the end of this season. How on earth do you get to the filter way down there by the output coupling? I can’t even see it much less work on it.
31TE Canvasback
2004 Hull no. 211
6CTA 8.3 450 HP
2004 Hull no. 211
6CTA 8.3 450 HP
-
catalina_mike
- Gold Member
- Posts: 718
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: ZF trans filter
It comes out the top. I just did mine on my Silverton and I know the Albin is tighter. I had to get in all sorts of positions for sure. Maybe a hired gun is the answer.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal