Hello, all. I am getting ready to do the cutlass bearing on my 2022 28TE with the Yanmar 6LP. Te guy mentoring me though the job has asked for a picture/drawing/diagram/measurements on the prop shaft tube. Everything/anything would be helpful with respect to insight on this job and various measurements (shaft size, length, etc.).
Thanks!
Tim
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
28TE/Yanmar prop shaft tube
Moderator: Jeremyvmd
-
tpilczak
- Gold Member
- Posts: 5
- Joined: Tue Jun 01, 2021 11:11 am
- Home Port: Weymouth, MA
-
RobS
- Gold Member
- Posts: 4047
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: 28TE/Yanmar prop shaft tube
The cutlass bearing is in a cast housing bolted to the skeg keel.
The shaft seal is on the shaft log (tube).
Plenty of info here, use the Search function and you shall find.
The shaft seal is on the shaft log (tube).
Plenty of info here, use the Search function and you shall find.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.