Hello , we have just purchased a Albin 25 without an engine.
Looking for suggestions as to what would be a good one.
Also will be requiring an engine cover.
If you have one or know where I could find one please let me know.
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 25 engine cover
-
zodiac
- Swabby
- Posts: 1
- Joined: Sat Jan 27, 2024 11:20 am
- Home Port: Deep Bay
-
WillieC
- Gold Member
- Posts: 2285
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: Albin 25 engine cover
Welcome, zodiac! Is that Deep Bay on the way to Comox? The DA crew and we were there for one night on anchor in '18 I think it was. Long day from Nanaimo, well at 6 kts.
Jerridsc might be one to contact for an engine cover, since he converted to electric outboard. See his post below yours about spare shaft and prop. He might have some other stuff for you. Or convince you to go electric..
Jerridsc might be one to contact for an engine cover, since he converted to electric outboard. See his post below yours about spare shaft and prop. He might have some other stuff for you. Or convince you to go electric..
-
dkirsop
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: Albin 25 engine cover
What is the year, serial number and model of your Albin 25? The engine cover and engine can vary with the model. Is your exhaust outlet on the port or starboard side. Do you have a 25mm or 30mm shaft?
Depending on your boat configuration I may have an engine that would be of interest to you. It is a recently rebuilt Albin AD21 two cylinder, fresh water cooled, diesel engine. It was a complete overhaul including the injectors, injection pump, cyclinders, valves, seals and bearings. Other than a test run in my driveway it has not been used since the work was done last year.
If you are interested I can send you a video of it running.
Depending on your boat configuration I may have an engine that would be of interest to you. It is a recently rebuilt Albin AD21 two cylinder, fresh water cooled, diesel engine. It was a complete overhaul including the injectors, injection pump, cyclinders, valves, seals and bearings. Other than a test run in my driveway it has not been used since the work was done last year.
If you are interested I can send you a video of it running.
Hull No. 1013, 1971