• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Water Level Gauge
-
kowal_53
- Gold Member
- Posts: 181
- Joined: Mon Nov 22, 2010 10:17 am
- Home Port: Annapolis, MD
Water Level Gauge
I have a water tank gauge on my 31 TE. It does not work. I see no circuit breaker, so I am assuming there is a fuse somewhere, most likely behind the 12 Volt panel. Any ideas before I dive into it?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Current: Good Mojo 2008 TE 31 - Cummins QSC 8.3 500 HP
Former: Blue Without You 2006 TE 28 - Yanmar 6PLA - 315 HP
Former: Blue Without You 2006 TE 28 - Yanmar 6PLA - 315 HP
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Water Level Gauge
I have the same gauge and originally in the same location. It's fused through the fresh water pump breaker.
If your water pump is working it's probable that it's the sender on top of your water tank .. this happened to me. Swapped out the Wema sender and the gauge was back up and running. You can test the sender with a multimeter to diagnose.
If your water pump is working it's probable that it's the sender on top of your water tank .. this happened to me. Swapped out the Wema sender and the gauge was back up and running. You can test the sender with a multimeter to diagnose.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13