I need to change my trans fluid for the first time. I have a ZF280-1A connected to a pump to remove the oil. The refilling part is my issue. The hoses for the trolling valve cover the fill port but the adjacent dip stick is easy access. Is there any reason not to use the dip stick port to refill the trans? I’m thinking there is a fill port for a reason, but......
Hope this is as obvious as it sounds but thought I would ask.
Thanks,
John
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
ZF 280-1A fluid change
Moderator: Jeremyvmd
-
furball
- Gold Member
- Posts: 352
- Joined: Sun Sep 16, 2007 8:51 am
- Home Port: Chester, Md
- Location: Castle Harbor Marina
- Contact:
ZF 280-1A fluid change
Chief
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: ZF 280-1A fluid change
Filling through the dipstick port is not an issue. That's how I do it on my 280.
Don't forget to check and clean the suction filter (bottom aft).
Don't forget to check and clean the suction filter (bottom aft).
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
furball
- Gold Member
- Posts: 352
- Joined: Sun Sep 16, 2007 8:51 am
- Home Port: Chester, Md
- Location: Castle Harbor Marina
- Contact:
Re: ZF 280-1A fluid change
Kevin,
Thanks for the quick reply. Glad to hear that.
I have a spare filter to install. Saw something on SBM about needing a cut down 36mm socket that i need to go back and read. Not sure it was a ZF280.
Thanks again,
John
Thanks for the quick reply. Glad to hear that.
I have a spare filter to install. Saw something on SBM about needing a cut down 36mm socket that i need to go back and read. Not sure it was a ZF280.
Thanks again,
John
Chief
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: ZF 280-1A fluid change
John,
No filter to replace on the 280 series gears, just a screen to remove and to clean. I think what you saw on Seaboard was to grind/sand the chamfer from the socket for a better bite which is absolutely helpful.
Best,
Kevin
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13