• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Porthole window Gasket
Moderator: Jeremyvmd
-
Royalllc
- Mate
- Posts: 13
- Joined: Sun Aug 02, 2020 4:18 pm
- Home Port: Long Beach
Porthole window Gasket
Does anyone know where I can get the gasket for this window?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
nebulatech
- Gold Member
- Posts: 544
- Joined: Thu Dec 12, 2019 12:46 am
- Home Port: Charleston, SC
Re: Porthole window Gasket
Most auto parts stores sell sheets of various gasket materials for $20 - $30. Last time I bought some, it was a roll, about 9 or 10 inches tall. If its big enough, it might save some headache to just make your own.
Carolina Wren
1979 Albin 25 Deluxe
1979 Albin 25 Deluxe
-
efishnsea
- Gold Member
- Posts: 159
- Joined: Mon Nov 02, 2009 9:45 pm
- Home Port: Staten Island NY
-
dkirsop
- Gold Member
- Posts: 639
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Porthole window Gasket
I had to remove and re-bed the same portlight last off season as one of the dogs weld had let go and I needed to rivet it back on.
I contacted the manufacturer to try and obtain a bedding gasket and was told that it was up to each installer to provide what would be applicable to their installation. I used Bed-it butyl tape from Marine-How-Too and it worked out perfectly.
I contacted the manufacturer to try and obtain a bedding gasket and was told that it was up to each installer to provide what would be applicable to their installation. I used Bed-it butyl tape from Marine-How-Too and it worked out perfectly.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Porthole window Gasket
From my email correspondence with Pompanette:
The only gasket we supply/sell is the gasket that goes between the lens and frame.
Gladdy Nugent
(954)525-6367
Pompanette, LLC
www.pompanette.com
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13