Back in the spring I discovered the port raw water pump was leaking around the seal, so I ordered a new pump from American Diesel Corp and replaced the old pump (I'd already swapped out the starboard pump back in 2018). I shot a couple video clips during that time and just recently spliced them together to produce a brief video. Most Lehman 120 owners either know this or figure it out pretty quickly, I think, but here it is for reference.
As I say in the video, wear on the drive tangs is not uncommon, particularly as these engines accumulate a few thousand hours. In this case, the port pump tangs were in fine shape, so perhaps I'll rebuild the pump and keep it as a spare.
https://youtu.be/OttvuQks5BQ
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Raw Water/Sea water pump replacement - Video link
-
cdsailor
- Gold Member
- Posts: 107
- Joined: Fri Sep 08, 2017 9:05 pm
- Home Port: St Joseph