• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Parts Question?????
-
- Gold Member
- Posts: 15
- Joined: Mon Jul 02, 2018 7:57 pm
- Home Port: long island
Parts Question?????
HI all the insets on both sides of the cock that has the grommets and the toe rails in them. Mine have cracks at the screws and one cracked where the toe rail is set. Does anyone have any idea where i might be able to get replacements??/ Many thanks in advance.
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
-
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Parts Question?????
You can remove it and make repairs from the back side using fiberglass cloth and resin. Then paint it to match. When I did mine I strengthened the areas that were weak and it came out great. Working on the 3rd season after repair and still no new cracks. Going to pull the other side when it warms up this spring.
28TE "Kozy L"
"How U Albin"
"How U Albin"
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Parts Question?????
What year? What material? Circa 2001 Albin switched from molded fiberglass inserts with recessed toe rails to plastic gunnel inserts with surface mounted toe rails.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Parts Question?????
Mine are plastic and I searched high and low for a replacement and struck out. Mine were also yellowed and cracked up. Mine are at my local body shop now getting fixed, beefed up, and sprayed to match the gelcoat. They were pretty bad. They are doing both for about $500. My boat is an 02
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”