• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
TE28 w/330 Cummins
-
sOUTHPORT
- Swabby
- Posts: 1
- Joined: Thu Aug 08, 2019 7:02 pm
- Home Port: mONTAUK ny
TE28 w/330 Cummins
looking at purchasing a 28 with a 330 Cummins. Would anyone know what tranny was in those boats? Also, what is the cruise speed? Thanks
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: TE28 w/330 Cummins
Most likely the ZF80 (HSW800) gear at 1.4:1. "Cruise" speed is a quite open to interpretation (and subject to varying conditions) but figure you should be able to dial her in for a safe mid to high teens cruise (knots).
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
larryrotta
- First Mate
- Posts: 21
- Joined: Sat Aug 25, 2018 10:37 am
- Home Port: suttons bay, MI
Re: TE28 w/330 Cummins
I run the Cummins 370B in a TE28 with a ZF trans, cruise speed at 2400 rpms yields 16-17 mph.
Larry,
Raffles ex Ruddy Duck
Suttons Bay, MI
Larry,
Raffles ex Ruddy Duck
Suttons Bay, MI
-
Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: TE28 w/330 Cummins
I'm also getting about 16 knots loaded at 2400 RPM with my 250HP JWAC Cummins - so that sounds about right but I top out at about 19 while I'd imagine the 370 would top out at 22-24 knots?
1994 TE 28' w/ Cummins 250