• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Engine Temperatures

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Dave
Gold Member
Gold Member
Posts: 61
Joined: Tue Jun 19, 2007 11:09 am
Location: Blind Bay, Nova Scotia

Engine Temperatures

Post by Dave »

If anyone has an Izuzu 160 HP Diesel what temperature are you running. Mine is usually 180F but sometimes creeps up to 185F.
The motor works great but the temperature does concern me a bit.
Top
User avatar
Mariner
Gold Member
Gold Member
Posts: 1450
Joined: Mon Apr 17, 2006 11:18 am
Location: Gig Harbor, WA

Post by Mariner »

That's actually pretty low. Our engine is considerably larger (420 hp Caterpillar 3126B), but it runs at about 195 degrees most of the time.
Top
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:
Contact jcollins

Post by jcollins »

I'm glad this thread started. I'd like to compare notes.
I have the Peninsular 400TA (310HP)
My temp is 180-185 until 3000 RPM. Then I am just under 200.
John
Former - 28 TE Convertible"Afterglow"
Top
User avatar
Cape Codder
Gold Member
Gold Member
Posts: 363
Joined: Thu Apr 19, 2007 8:59 pm
Location: Falmouth, MA - Cape Cod

Post by Cape Codder »

When fully warmed up, Yanmar 315 runs just under 180 F.
Bob
2003 Albin 28 TE
Santosha
Top
Denis
Gold Member
Gold Member
Posts: 544
Joined: Tue Apr 18, 2006 1:28 pm
Location: Mystic, CT

Post by Denis »

My 300HP Peninsular has a 160 degree thermostat and that is what it shows while running.
Former Owner of
1994 28'TE
"Red Stripe"
Top
Post Reply

Return to “Albin Maintenance”