Does anyone happen to know the beam of the transom on the 31? I am trying to figure something out & won't be back to the boat until the weekend.
Thanks,
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Transom Beam Measurement - 31 Albin
-
Jkraft
- Gold Member
- Posts: 517
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Transom Beam Measurement - 31 Albin
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
Mark Laurnen
- Gold Member
- Posts: 48
- Joined: Fri Nov 23, 2018 3:42 pm
- Home Port: Anacortes, WA
- Location: Evergreen, CO
Re: Transom Beam Measurement - 31 Albin
Hello Jkraft! I would assume it is 12’. Looking at mine it looks like a straight shot from midship back to the stern corners. There is no apparent taper which would make the stern width narrower than the listed beam.