Suggestions needed
Thanks
LOLA (Onset MA)
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Mooring line length 28 TE
-
Connormike73
- Gold Member
- Posts: 15
- Joined: Fri Nov 17, 2023 5:30 pm
- Home Port: Onset, Massachusetts
- Location: Massachusetts
Mooring line length 28 TE
Trying to figure out how long my mooring line ought to be overall, from cleats to ball. The cleats on my 28 are further back than I'm used to. I was planning to do the bridle approach.
Suggestions needed
Thanks
LOLA (Onset MA)
Suggestions needed
Thanks
LOLA (Onset MA)
-
Nancy
- Gold Member
- Posts: 1938
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Mooring line length 28 TE
A bridle is definitely the way to go. Don't pass it through the chocks...that would be unnecessary chafe not to mention the chocks are very weird. I don't know how long.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987