My 28 did not come plumbed for a livewell. I have an unused 3/4" seacock and am about to plumb a pump in. My question is where to place the water inlet fitting / valve in the livewell itself? I'll be removing the starboard side rod holder box to get a look and access. My guess is on the forward outboard side of the livewell towards the top? Searched the forum and couldn't find anything showing the location of the fill valve. Pics would be helpful!!
Also, thanks to this forum I'll be making sure the livewell top seams are sealed well and adding a drain pipe to the bottom drain
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
28 TE Livewell inlet / fill valve location?
- GSSeattle
- Gold Member
- Posts: 128
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
28 TE Livewell inlet / fill valve location?
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"
-
- Gold Member
- Posts: 1906
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: 28 TE Livewell inlet / fill valve location?
Our 1995 28TE didn't have a transom door, and the livewell was in the port compartment. Hope this photo will give you some ideas.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- GSSeattle
- Gold Member
- Posts: 128
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: 28 TE Livewell inlet / fill valve location?
Thank you!! That corner location is about where I figured there would be space to mount it (except for on the starboard side on mine).
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"
-
- Gold Member
- Posts: 520
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: 28 TE Livewell inlet / fill valve location?
Mine was starboard side dead center at the top of the livewell, mounted on the starboard wall of the livewell
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
- GSSeattle
- Gold Member
- Posts: 128
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: 28 TE Livewell inlet / fill valve location?
Appreciate the response! I'll be taking a closer look this weekend to see where I have enough access to mount it.
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"