• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
rough around the edges Albin 25
-
DesertAlbin736
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: rough around the edges Albin 25
Looks like something that ought to be patented & make a fortune from!
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
I think there is already a patent out on something similar as there is a company that sells something similar, there are a bunch of devices out there that help prevent roll at anchor, and anyway that sounds like a job which will cut into my boating time 
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Here’s a few pictures from this last years Desolation and Discovery Islands trip, not in any particular order.
And some Gulf Islands.
We always start out in Wallace island where we met up with three other Albins coming from the Ladysmith Rendesvous.
Mudge Island
Shoal Bay looking up Phillips arm.
Shark Spit.
And some Gulf Islands.
We always start out in Wallace island where we met up with three other Albins coming from the Ladysmith Rendesvous.
Mudge Island
Shoal Bay looking up Phillips arm.
Shark Spit.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by ssrig on Mon Nov 07, 2022 1:00 pm, edited 1 time in total.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Ho hum! Another whale.
Octopus Islands.
Some odd things that came up in our prawn trap. Hermit crap in the shell.
Some odd things that came up in our prawn trap. Hermit crap in the shell.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Swimming scallops that swan into our prawn trap?
Hermy the hermit crab.
Water fall up Toba inlet.
Brem Bay Toba inlet.
Toba.
Octopus.
Hermy the hermit crab.
Water fall up Toba inlet.
Brem Bay Toba inlet.
Toba.
Octopus.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by ssrig on Mon Nov 07, 2022 1:17 pm, edited 1 time in total.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Walsh cove pictographs.
Salmon my wife caught right in this little bay twenty feet from shore!
Roscoe Bay.
Letting the auto pilot drive.
Clams!
Salmon my wife caught right in this little bay twenty feet from shore!
Roscoe Bay.
Letting the auto pilot drive.
Clams!
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Sunrise from home?? Not part of the trip but the picture didn’t want to leave?
Float plane ,Nanaimo harbour.
On our way home stopped in at Wallace and barely squeezed into a spot.
Adding 2022 and sprucing up our sign on Wallace.
This one’s for DA!
Float plane ,Nanaimo harbour.
On our way home stopped in at Wallace and barely squeezed into a spot.
Adding 2022 and sprucing up our sign on Wallace.
This one’s for DA!
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Sydney Spit.
Rum Island.
Rum Island.
Pender islands canal.
Port Browning.
Rum Island.
Rum Island.
Pender islands canal.
Port Browning.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
ssrig
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: rough around the edges Albin 25
Doing 10.6 knots in Dent Rapids!
Ling Cod.
Cheers!
Ling Cod.
Cheers!
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
dkirsop
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: rough around the edges Albin 25
Stop it! You are killing me with jealousy! Especially with that ling cod.
Hull No. 1013, 1971
-
Dieselram94
- First Mate
- Posts: 435
- Joined: Sun Jul 15, 2018 1:43 am
- Home Port: Rockland, Maine
- Location: Mid coast Maine
Re: rough around the edges Albin 25
I believe that old willies truck was shown in a YouTube video put out by travels with jordy. He cruises that area, and I’m quite sure I’ve seen it in his videos.
-
A251975
- Mate
- Posts: 11
- Joined: Sun Jan 20, 2019 5:01 pm
- Home Port: Sequim,WA
Re: rough around the edges Albin 25
I apologize if this has already been answered, but the 3 A25s I’ve worked on with 30mm shafts are threaded 20x2.50mm; nearly identical to 3/4-10, but not quite. With some care you can run a metic tap thru a 3/4-10 nut and have a perfect fit. Ideally, you would enlarge the 3/4 nut with a 23/32 drill but I have done some without it. I typically use a special bronze nut that attaches a prop nut zinc. I bought a metric tap on ebay for about $12. The ISO standard for metric prop shafts calls for a different taper than the SAE standard. Also, the keyway on the Albin 30mm shafts was actually standard for the next size larger shaft; so, overwidth for 30mm. (10mm vs 8mm).
-
A251975
- Mate
- Posts: 11
- Joined: Sun Jan 20, 2019 5:01 pm
- Home Port: Sequim,WA
Re: rough around the edges Albin 25
My error: a proper tap drill for 20x2.50 is not 23/64. In fact, I have used 22/64(11/16) and found the fit a bit loose, but still ok. Works best just re-tapping the 3/4-10 if you are able.
-
DesertAlbin736
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: rough around the edges Albin 25
Ives,
Your excellent photos have me salivating to get back up there next year! It's been too long, 3 years, since our last BC Albineer rendezvous in 2019 & 4 years going on 5 since Desolation Sound with Rick & Heidi in WillieC. We will be in New Zealand next spring, "campervanning" for a week on the South Island & see Milford Sound up close (very much like the BC Inside Passage but with different trees). We fly out to Queenstown, NZ on March 14 & gain a day crossing the date line, then after 8 days of RV'ing take ship on Holland America's MS Noordam for a 39 day repositioning cruise across the Pacific that ends up debarking in Vancouver, BC on May 2nd. Then once back home we'll have a month to get La Dolce Vita ready for our 5th trailering road trip to PNW sometime in the first couple weeks of June & be afloat thru July & some if not all of August. This time hopefully buddy boating with our Arizona sailing friends who now have a Southern Cross 31 full keel cutter rigged sloop based in La Conner, WA, presently laid up on the hard for winter storage. They have never been farther north than Pender Harbour/Garden Bay & Chatterbox Falls. We want to return to Desolation Sound & maybe shoot for the Broughtons.
https://www.youtube.com/watch?v=poewLOldXyA&t=555s
Your excellent photos have me salivating to get back up there next year! It's been too long, 3 years, since our last BC Albineer rendezvous in 2019 & 4 years going on 5 since Desolation Sound with Rick & Heidi in WillieC. We will be in New Zealand next spring, "campervanning" for a week on the South Island & see Milford Sound up close (very much like the BC Inside Passage but with different trees). We fly out to Queenstown, NZ on March 14 & gain a day crossing the date line, then after 8 days of RV'ing take ship on Holland America's MS Noordam for a 39 day repositioning cruise across the Pacific that ends up debarking in Vancouver, BC on May 2nd. Then once back home we'll have a month to get La Dolce Vita ready for our 5th trailering road trip to PNW sometime in the first couple weeks of June & be afloat thru July & some if not all of August. This time hopefully buddy boating with our Arizona sailing friends who now have a Southern Cross 31 full keel cutter rigged sloop based in La Conner, WA, presently laid up on the hard for winter storage. They have never been farther north than Pender Harbour/Garden Bay & Chatterbox Falls. We want to return to Desolation Sound & maybe shoot for the Broughtons.
https://www.youtube.com/watch?v=poewLOldXyA&t=555s
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond