I have an 1987 A27 Sport with the 6 BD1 engine and 1 1/2" shaft. It currently has a propeller that I believe was modified to fit this boat but not sure if it is the best size. It is a 4 bladed 18" RH with a pitch of 20. Anybody have the specs on what works best for them and what they might have for rpm/cruising speeds?
Thanks,
Joe
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
propeller size on A27
-
rockycoastcruises
- Gold Member
- Posts: 27
- Joined: Thu Sep 03, 2020 4:11 pm
- Home Port: Harpswell, Maine
-
WillieC
- Gold Member
- Posts: 2281
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: propeller size on A27
For comparison purposes, and maybe more, contact your local prop shop since they have all the tools/programs to determine the right prop. You'll have to provide details about your boat/engine/transmission, etc.
If you've already done this and are looking for confirmation, my apologies.
If you've already done this and are looking for confirmation, my apologies.
-
motthediesel
- Gold Member
- Posts: 326
- Joined: Wed Sep 11, 2019 12:10 am
- Home Port: Thousand Islands NY
Re: propeller size on A27
Wow, that Isuzu has almost two and a half times the horsepower of the 4D61 in our 27FC, so anything I know about ours would be of little help to you. As Willie says, a good prop shop could help, or I would recommend reading "The Propeller Handbook" by Dave Gerr. That's a fine introduction to a fascinating subject: or the entrance into a black hole of endless speculation -- whichever you prefer! 
Tom
Tom