• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

hello, new here.. looks like a nice place.

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
tomcat rio

hello, new here.. looks like a nice place.

Post by tomcat rio »

I've got a '93 Albin 28 Tournament Express. I just put a 2006 Peninsular 310 in it with a 2.00:1 ZF63IV transmission and a 4 blade 18"x26" propeller.
It seems to be okay, I had a Marine Power 230 prior to that. I started getting oil in the bilge, and figured a replacement would make more sense versus a rebuild.

At about 2950 rpm, it does 14.5 to 15.5 kts burning 10.0 gph (flowscan/gps). I sometimes see the same boat for sale and some sellers say they do 20 kts at 7gph, which seems a little optomistic to me, even with a Yanmar.

I thought the Peninsular would be pretty much a drop-in, but using the original mount points, the water pump was so close to the tank bulkhead that an impeller replacement looked like a major project. Do any folks here have newer replacement Peninsulars? If so, how is your water pump clearance?

The shop mounted the engine about 3" foward and I had to have a piece cut in the deck and engine cover to accomodate the exhaust elbow.

See picture:

http://static.flickr.com/46/127547476_258f7ef042.jpg

I also wanted to have an exhaust gas temperature gauge which turned out to be a problem due to the aftercooler. You can see the egt probe screwed into the black elbow. The exhaust is too cool there and it looks like I have to mount the prop upstream on the crossover manifold. Not a big deal just a pain.

In any case, it is nice to meet you all,

Ed Flanagan


[Edited for spelling, grammer, and clarity -Mariner]
User avatar
chiefrcd
Gold Member
Gold Member
Posts: 541
Joined: Mon Jun 19, 2006 10:29 am
Home Port: Deltaville, VA
Location: Deltaville Virginia
Contact:

Post by chiefrcd »

Welcome Ed. That's an engine compartment full my friend. I also agree, I wish I could get 20 kts. at 7 gph....at 20 knots I'm burning a tad bit more than 10gph shown on a flow scan as well. I'm running a 6lp300 STE Yanmar, 1999.

Where do you do most of your boating? Glad you found us Albin folks, I think we've all been looking for a place like this to share our Albin stories and find some mutual help. Again welcome aboard.
Albin 28TE "Southwind"
tomcat rio

i'm in mattituck ,ny on the peconic bay side...

Post by tomcat rio »

..great place for a boat. been here since '79. had a blowboat (catalina 27) for many years. got a steigercraft cheseapeake 25 in 2001 and then the albin last year. drove it home from sandy hook, new jersey...so far its fine. fast enough to wakeboard and a decent overnighter. excellent for fishing, too. and of course, its not so big you need a comittee to run it.
..
http://www.nauticalcharts.com/noaapage.php?m=12358
...
at the barge restaurant in port of egypt. 2nd from left is my brother, rickey just back from iraq in november at age 57, the same age my father was when i was in vietnam.i'm on the left. my albin at the dock and
shelter island in the distance.
..
http://static.flickr.com/66/210459736_1710c68074.jpg
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Post by jcollins »

Welcome to the board! I know I posted in your other message but I think your prop may need to be changed. I am no expert and others here will provide better information but 10 GPH seems high.
John
Former - 28 TE Convertible"Afterglow"
Post Reply

Return to “General Discussion”