• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
3gm30 install
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
3gm30 install
DA. or someone else with a 3GM30. Do you have some images of the engine mounts and how you made the bed fit? Someone was asking on FB
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: 3gm30 install
Ulf,
Merry Christmas! I missed this post the other day. We inherited our 3GM30F already installed by previous owners. It included a AquaDrive thrust bearing/CV joint setup with makes it almost vibration free. Here are some pictures.
The soft engine mounts are bolted to flat steel plates attached to the engine beds. The thrust bearing bolts to a fabricated angle iron piece bolted to the engine bed rails. The thrust bearing takes all the load from prop thrust so no direct force is placed on engine & transmission & with soft mounts & CV joints (like a front wheel drive car) very little vibration is transmitted to the hull.
Joe DeMers of Sound Marine Diesel used to have a shop at 86 E Main in Plainville CT near Hartford & a web page discussing re-repowering small diesels including Albin 25s. We stopped by to visit that shop in June, 2015 on the way from Erie Canal to Weekapaug, RI to spend a week with sailing friends at a beach house owned by a sailing friend. But that shop is now doing business as Affordable Marine Power Center & may not be connected with Mr. DeMers anymore & no longer lists itself as Beta diesel dealer nor a Yanmar dealer. Now seems to specialized in gas powered boats.
https://www.affordablemarine.com/
Joe's "Sound Marine Diesel LLC" is still listed to his home address at 127 Walsh St, Newington, CT 06111, also in the Hartford area, but no active website or phone number. If you can contact him he could give good advice on installing a 3GM30 in an Albin 25.
Merry Christmas! I missed this post the other day. We inherited our 3GM30F already installed by previous owners. It included a AquaDrive thrust bearing/CV joint setup with makes it almost vibration free. Here are some pictures.
The soft engine mounts are bolted to flat steel plates attached to the engine beds. The thrust bearing bolts to a fabricated angle iron piece bolted to the engine bed rails. The thrust bearing takes all the load from prop thrust so no direct force is placed on engine & transmission & with soft mounts & CV joints (like a front wheel drive car) very little vibration is transmitted to the hull.
Joe DeMers of Sound Marine Diesel used to have a shop at 86 E Main in Plainville CT near Hartford & a web page discussing re-repowering small diesels including Albin 25s. We stopped by to visit that shop in June, 2015 on the way from Erie Canal to Weekapaug, RI to spend a week with sailing friends at a beach house owned by a sailing friend. But that shop is now doing business as Affordable Marine Power Center & may not be connected with Mr. DeMers anymore & no longer lists itself as Beta diesel dealer nor a Yanmar dealer. Now seems to specialized in gas powered boats.
https://www.affordablemarine.com/
Joe's "Sound Marine Diesel LLC" is still listed to his home address at 127 Walsh St, Newington, CT 06111, also in the Hartford area, but no active website or phone number. If you can contact him he could give good advice on installing a 3GM30 in an Albin 25.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 3gm30 install
Thanks DA! Looks like they made new engine mount brackets to move the mounts out to the bed.
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct