Hello, I'm the new owner of Mdina, a '94 28TE that was modified for length by shortening the bow sprit. I'm looking for a source to replace the modified one with something more like the original. Is there someone out there who may be building these parts, or should I look to a local fiberglass fabricator. Alternatively, has anyone gone custom with stainless or aluminum fabrication? If so, I'd like to see how it was done.
Thanks, Greg
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
New Member with a question about Bowsprit
-
gregnjan
- Swabby
- Posts: 2
- Joined: Thu Sep 23, 2021 4:03 pm
- Home Port: Santa Barbara, CA