• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
16”x12” propeller on A25?
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
16”x12” propeller on A25?
Saw a used, like new 16x12 RH prop for sale. Driftless has a 16.75x12 but only rev to 2700. Engine is rated at 3200. 2.04:1 reduction. Its like new. Should i buy it and try or is it not much different. Spare maybe?
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- First Mate
- Posts: 431
- Joined: Sun Jul 15, 2018 1:43 am
- Home Port: Rockland, Maine
- Location: Mid coast Maine
Re: 16”x12” propeller on A25?
If it’s cheap enough, you can always have a prop shop clip it or repitch it too.
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 16”x12” propeller on A25?
Yes, it was in the $100 something range. Looked new
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: 16”x12” propeller on A25?
I had my 16.5"x12" trimmed to 16"x12". Also had the shop cup the blades to improve efficiency. Have been very pleased with results. Speed increased about 0.5 kts and cruising RPM could be reduced by about 200rpm, fuel economy increased proportionately. There was also a sound reduction of about 1/2 db with the lower RPM.
Hull No. 1013, 1971
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 16”x12” propeller on A25?
So i went and got the prop. It looks kind of sporty with swept blades….
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 16”x12” propeller on A25?
Here is my stock one. Its also a 16x12 but looks more ” classic”…. Tempted to swap…
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: 16”x12” propeller on A25?
Michigan Wheel is a quality prop manufacturer. You got a good deal!
Hull No. 1013, 1971
- DCatSea
- Gold Member
- Posts: 917
- Joined: Wed Aug 20, 2014 9:53 pm
- Home Port: Alexandria VA
- Location: Alexandria VA
Re: 16”x12” propeller on A25?
For what it's worth, I just switched out the OEM 15x11 on our 27FC by way of an experiment. The objects were: 1) to see if I could get to normal cruising with fewer revs, thereby 2) reducing noise; also, 3) improve low-speed handling, especially when backing in.
Results:
1) Reached cruising (6.5 - 7kts) at 2400 rpm as opposed to 2800-2900) with better uptake. Vibration negligible, running temp 150-160), OP 55-60. Engine seems perfectly happy (famous last words??).
2) Noise level at cruise way better than before. Next stage is updated insulation and a Db reading or 2.
3) After the initial shock of having a responsive boat, this may signal a huge improvement. 2 good dockings with crosswind in the latest.
Still need to do a full, longer sea trial and flank speed run to see how engine and gearbox react, but so far so good.
Results:
1) Reached cruising (6.5 - 7kts) at 2400 rpm as opposed to 2800-2900) with better uptake. Vibration negligible, running temp 150-160), OP 55-60. Engine seems perfectly happy (famous last words??).
2) Noise level at cruise way better than before. Next stage is updated insulation and a Db reading or 2.
3) After the initial shock of having a responsive boat, this may signal a huge improvement. 2 good dockings with crosswind in the latest.
Still need to do a full, longer sea trial and flank speed run to see how engine and gearbox react, but so far so good.
Doug and Georgia
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 16”x12” propeller on A25?
Interesting!DCatSea wrote: ↑Fri Jun 25, 2021 1:07 pm For what it's worth, I just switched out the OEM 15x11 on our 27FC by way of an experiment. The objects were: 1) to see if I could get to normal cruising with fewer revs, thereby 2) reducing noise; also, 3) improve low-speed handling, especially when backing in.
Results:
1) Reached cruising (6.5 - 7kts) at 2400 rpm as opposed to 2800-2900) with better uptake. Vibration negligible, running temp 150-160), OP 55-60. Engine seems perfectly happy (famous last words??).
2) Noise level at cruise way better than before. Next stage is updated insulation and a Db reading or 2.
3) After the initial shock of having a responsive boat, this may signal a huge improvement. 2 good dockings with crosswind in the latest.
Still need to do a full, longer sea trial and flank speed run to see how engine and gearbox react, but so far so good.
What did you replace with?
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
- DCatSea
- Gold Member
- Posts: 917
- Joined: Wed Aug 20, 2014 9:53 pm
- Home Port: Alexandria VA
- Location: Alexandria VA
Re: 16”x12” propeller on A25?
An unused Michigan Wheel 16x14 3-blade from Craigslist for $120.00.
Should have added that in addition to this I had the drive train rebuilt - new cutless bearing, stuffing block (old style) removed, cleaned up and repacked, Drive Saver (German) stripped, thoroughly rehabbed. Everything polished up and shiny.
Something had to work better after this
Should have added that in addition to this I had the drive train rebuilt - new cutless bearing, stuffing block (old style) removed, cleaned up and repacked, Drive Saver (German) stripped, thoroughly rehabbed. Everything polished up and shiny.
Something had to work better after this
Doug and Georgia
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: 16”x12” propeller on A25?
Wow thats a substantially larger prop!
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: 16”x12” propeller on A25?
Wow! 15"x11" is OEM for the FC 27? That seems so small! What is your gear ratio and motor size?DCatSea wrote: ↑Fri Jun 25, 2021 1:07 pm For what it's worth, I just switched out the OEM 15x11 on our 27FC by way of an experiment. The objects were: 1) to see if I could get to normal cruising with fewer revs, thereby 2) reducing noise; also, 3) improve low-speed handling, especially when backing in.
Results:
1) Reached cruising (6.5 - 7kts) at 2400 rpm as opposed to 2800-2900) with better uptake. Vibration negligible, running temp 150-160), OP 55-60. Engine seems perfectly happy (famous last words??).
2) Noise level at cruise way better than before. Next stage is updated insulation and a Db reading or 2.
3) After the initial shock of having a responsive boat, this may signal a huge improvement. 2 good dockings with crosswind in the latest.
Still need to do a full, longer sea trial and flank speed run to see how engine and gearbox react, but so far so good.
I am pretty sure that when Albin increased the engine size on the A25 Super Deluxe to a VP 36 hp they installed a 17"x 14" prop, might be totally wrong on that.....
-
- Gold Member
- Posts: 2281
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: 16”x12” propeller on A25?
ssrig, you are correct on the A25 spec. (Ours is 17X13.)
-
- First Mate
- Posts: 289
- Joined: Thu Jul 19, 2018 4:14 pm
- Home Port: ganges
Re: 16”x12” propeller on A25?
I might have gotten the 17"x 14" from the boat I was looking at - Alanje? The gear ratio must be quite different for the 27, I did like the push at low rpm's on the Alanje when docking with the big prop.
- DCatSea
- Gold Member
- Posts: 917
- Joined: Wed Aug 20, 2014 9:53 pm
- Home Port: Alexandria VA
- Location: Alexandria VA
Re: 16”x12” propeller on A25?
Bog-standard 4D61 Lehman in VG condition (1704hrs). 2:1 Hurth tranny. Performance with the 15x11 was uninspiring, and basically I saw the 16x14 on CL for a VG price and thought WTH I'll give it a shot. So far I'm a happy camper.
Doug and Georgia
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03