I'm going to change out the "stop button" on the panel as the rubber is cracked and ratty looking, while doing some reading, it was stated the new button needs to have a coating on it, similar to MareLube to keep the two dissimilar metals from corroding in the saltwater environment.
looking for any advise/tips on changing out the button, and any thoughts on the MareLube, or similar/better product.
thanks
• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
stop button R/R & MareLube TEF 45
Moderator: Jeremyvmd
-
gmberkley
- Gold Member
- Posts: 258
- Joined: Mon Dec 07, 2020 3:08 pm
- Home Port: Fairhaven, MA
- Location: Falmouth, MA
stop button R/R & MareLube TEF 45
Gregg M. Berkley 25 Ton Master USCG
2005 Albin 28 TE Flush Deck
Fairhaven, MA
2005 Albin 28 TE Flush Deck
Fairhaven, MA