Salt water wash down pump

JJ28 · Post by **JJ28** » Wed Jul 08, 2020 11:54 am

I was using the Salt water wash down on my 2006 Albin 28 and suddenly it stopped as if it wasn't getting any power. I looked for loose wires and found none. Is there a fuse on the switch board than can blow and stop the pump?

IMG_4117.jpg

Post by **Pitou** » Wed Jul 08, 2020 6:24 pm

Tour fuse reset button is right next to the switch.

JJ 28.jpg

JJ28 · Post by **JJ28** » Mon Jul 13, 2020 7:48 am

Thanks, I appreciate it the help. This will sound like a dumb question but it doesn't appear there is a with inside the clear rubber. Do you simply press own on that to reset the fuse?

Post by **Pitou** » Mon Jul 13, 2020 2:50 pm

JJ28 wrote: ↑Mon Jul 13, 2020 7:48 am Thanks, I appreciate it the help. This will sound like a dumb question but it doesn't appear there is a with inside the clear rubber. Do you simply press own on that to reset the fuse?

If the issue is your fuse, yes. Look closely and you'll see a white button behind and deep inside the rubber boot.

Post by **catalina_mike** » Mon Jul 13, 2020 3:10 pm

Because it is a circuit breaker that can be reset and not a fuse that blows. However it "Tripped" for a reason. Verify connections and check the back through the cabinet in the bathroom.

Albin Owners Group

Albin Owners Group

Salt water wash down pump

Salt water wash down pump

Re: Salt water wash down pump

Re: Salt water wash down pump

Re: Salt water wash down pump

Re: Salt water wash down pump