• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Anode replacement A25
-
WillieC
- Gold Member
- Posts: 2285
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: Anode replacement A25
I agree, having taken a closer look. Definitely not the Handy Dandy nut/prop puller.
-
Dieselram94
- First Mate
- Posts: 435
- Joined: Sun Jul 15, 2018 1:43 am
- Home Port: Rockland, Maine
- Location: Mid coast Maine
Re: Anode replacement A25
I replaced my bronze shaft last year with a brand new stainless shaft. I ordered the new shaft to be a little longer to accommodate a zinc/cutter combo and still leave a bit of room between the cutless bearing. This put the prop but close to the rudder, but I plan to notch the rudder a bit more than it is already...