• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Build Cost New 28 TE

Post Reply
Jkraft
Gold Member
Gold Member
Posts: 521
Joined: Mon Aug 26, 2019 9:22 pm
Home Port: Chestertown, MD

Build Cost New 28 TE

Post by Jkraft »

I did a quick search and couldn't turn anything up. Does anyone know what a new 28 TE with all of the options would have been circa 2002? Just curious. It would be even cooler to see a built/ spec sheet. Anyone have one?
USCG 100 Ton Master

Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp

Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Build Cost New 28 TE

Post by Norseman »

Jkraft wrote: Tue May 19, 2020 9:15 am I did a quick search and couldn't turn anything up. Does anyone know what a new 28 TE with all of the options would have been circa 2002? Just curious. It would be even cooler to see a built/ spec sheet. Anyone have one?
I probably have one if I dig a bit into the files.
Previous owner was good at documenting stuff.

That being said, I ran across a brand new 2015 Albin 28TE five years ago, I believe it was listed for about, or around $153,000.
I contacted the broker but he never returned my messages and I ended up buying a new 2016 Glacier Bay 2770 for about the same money.
(Did not fall In love with the GB and sold it 18 months later for $9.5k MORE than I paid, still in shock. :shock: )
Started looking for a used Albin 28TE again, and found my current boat September 2017, good boat, good price, all good.
Will look for the Albin brochures and spec sheets and post right here.
Stay tuned.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
Jkraft
Gold Member
Gold Member
Posts: 521
Joined: Mon Aug 26, 2019 9:22 pm
Home Port: Chestertown, MD

Re: Build Cost New 28 TE

Post by Jkraft »

Dag that would be amazing! Thanks!
USCG 100 Ton Master

Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp

Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Build Cost New 28 TE

Post by Pitou »

I've got a sheet on my 2002 & will try to dig it out .. Maxed out on options with Alaskan Bulkhead, generator, deluxe helm chairs, cherry head door, all cabinetry trimmed in cherry including head, windlass, Vetus 55 bow thruster, electric head, transom door. Most of these items were options. List price $172,000. In 2004 .. boat show pricing without Alaskan bulkhead or generator was $165k.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
User avatar
Norseman
Gold Member
Gold Member
Posts: 1710
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Build Cost New 28 TE

Post by Norseman »

Did a quick search for the brand new Albin 28TE five years ago: The link don’t work but the headline is still on the ‘net:

“ 2015 Albin 28 TE - 28'. 1 / 10. Year, 2015. Length, 28ft. Price, USD $198,000. Type: New. Categories: Power. Location, Stamford, CT, United States. Hull Material. Engine type, Single. Fuel ...”

I seem to remember a bit less money, but perhaps this was the initial listing.. :shock:

(Albin or somebody tried to start up again, but it did not work: I tried to get the last one, but broker did not respond )
:wink:
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Build Cost New 28 TE

Post by Pitou »

Norseman wrote: Tue May 19, 2020 10:21 pm Did a quick search for the brand new Albin 28TE five years ago: The link don’t work but the headline is still on the ‘net:

“ 2015 Albin 28 TE - 28'. 1 / 10. Year, 2015. Length, 28ft. Price, USD $198,000

(Albin or somebody tried to start up again, but it did not work: I tried to get the last one, but broker did not respond )
:wink:
NorthCoast Boats bought the 28 mold and maybe the 31 at the mid to tail end of the last recession after Shamrock had failed with the 28 & 31 TE series.

NorthCoast built a couple of 28's and they sat on them for a long time. Standish had one and the same hull appeared for two consecutive years at the Boston Boat Show before finally selling. These were bad times for boat builders building on spec. NorthCoast finally abandoned the Albin line. Not sure where the molds are now .. probably weathering behind some building.

Standish has moved on now too, representing Eastern and NorthCoast Boats.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
MerryKate
First Mate
First Mate
Posts: 43
Joined: Mon Jan 09, 2017 10:17 pm
Home Port: Mason Neck, VA

Re: Build Cost New 28 TE

Post by MerryKate »

We ordered our 28TE from the factory in Portsmouth RI in late 1996. Not highly optioned but with the Cummins 250B was $86k out the door.
User avatar
JackK
Gold Member
Gold Member
Posts: 465
Joined: Fri Jun 30, 2006 8:14 am
Home Port: Portsmouth, Rhode Island
Location: Plainville, MA

Re: Build Cost New 28 TE

Post by JackK »

This is my build sheet for Dogonit, 2003 Albin 28 TE Flush Deck.
I made some changes to the electronics before delivery (switched from Raymarine to Furuno) but this gives the list price for just about everything ... because I think I put just about everything on Dogonit.

28' TOURNEMENT EXPRESS
-SINGLE 315 HP YANMAR DIESEL $119,600.00
-HULL COLOR - NAVY $2,500.00
-NON SKID DECK SURFACES $1,000.00
-CUSTOM LOCKERS $910.00
-MANUAL MARINE TOILET & MACERATOR $810.00
-LIVE BAITWELL W/ SALT WTR WASHDOWN $700.00
-DOCKSIDE CITY WATER $190.00
-FRESHWATER WASH DOWN $260.00
-STAINLESS STEEL PORTS & HATCH $2,000.00
-SWIM PLATFORM $2,035.00
-SWIM LADDER $200.00
-TRANSOM DOOR $2,010.00
-TRANSOM SHOWER $310.00
-EXTENDED ROOF WHEELHOUSE $275.00
-CANVAS BACKDROP 3 PC $975.00
MSRP $133,775.00

-DUAL BATTERY UPGRADE 4D $370.00
-TV/VCR COMBO W/ CABINETS $1,125.00
-2 ROCKET LAUNCHERS $200.00
-JACK LINE $210.00
-ANCHOR WINDLASS & RODE $3,545.00
CUSTOM ROD LOCKER $450.00
SL-145 REMOTE OPERATED SPOT LIGHT $245.00
12 VOLT FLOOD LIGHT ON ARCH $80.00
STANDARD HORIZON GX2355S VHF RADIO $299.00
HAILER / PA HORN -
SHAKESPEARE VHF ANTENNA $40.00
RL70CRC PLUS + 2KW RADOME ANTENNA $2,894.00
RAYMARINE L760 FISHFINDER $2,048.00
BRONZE THRU-HULL SPEED,TEMP DEPTH TRANSDUCER -
RAYMARINE RAYSTAR 120 GPS SENSOR $409.00
RUPP SIDEKICK OUTRIGGERS $2,000.00
PROSINE 1800 INVERTER $900.00
RITCHIE COMPASS $100.00
TOTAL OPTIONS $14,915.00
TOTAL LIST PRICE $148,690.00
COMMISSIONING & LABOR $5,100.00
$153,790.00

With all this COVID-19 lock down, I miss the boat more than ever. At least I could have social distanced at the marina :)
former boat .. 2003 28 TE Flushdeck Dogonit
Yearwood
Gold Member
Gold Member
Posts: 228
Joined: Mon Mar 19, 2007 7:20 am

Re: Build Cost New 28 TE

Post by Yearwood »

We purchased a 2001 in January 2001 with 27 hours on the engine for $108,000. No A/C, Yanmar, reasonable electronics, radar. My recollection is the factory price was around $135,000.
Don
User avatar
Tree
Gold Member
Gold Member
Posts: 1615
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Build Cost New 28 TE

Post by Tree »

Pitou wrote: Wed May 20, 2020 8:44 am
Norseman wrote: Tue May 19, 2020 10:21 pm Did a quick search for the brand new Albin 28TE five years ago: The link don’t work but the headline is still on the ‘net:

“ 2015 Albin 28 TE - 28'. 1 / 10. Year, 2015. Length, 28ft. Price, USD $198,000

(Albin or somebody tried to start up again, but it did not work: I tried to get the last one, but broker did not respond )
:wink:
NorthCoast Boats bought the 28 mold and maybe the 31 at the mid to tail end of the last recession after Shamrock had failed with the 28 & 31 TE series.

NorthCoast built a couple of 28's and they sat on them for a long time. Standish had one and the same hull appeared for two consecutive years at the Boston Boat Show before finally selling. These were bad times for boat builders building on spec. NorthCoast finally abandoned the Albin line. Not sure where the molds are now .. probably weathering behind some building.

Standish has moved on now too, representing Eastern and NorthCoast Boats.

Just been chatting with north coast via Instagram and they still have the molds out back. They’ve just launched a 315HT that screams Albin but it’s designed by Jose DaPonte apparently.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Mike Monte
First Mate
First Mate
Posts: 68
Joined: Sun Dec 14, 2014 12:06 pm
Home Port: Portsmouth, RI

Re: Build Cost New 28 TE

Post by Mike Monte »

I purchased my 2001 28TE from Standish in 2002.
It was their "demo boat" from the previous year and had about 15 hrs. on the engine....essentially new.
Radar/GPS/Radio/swim platform/wood trim on interior.
$120,000.00

Ken at Standish told me that he sold 25 Albins in 2001.
Post Reply

Return to “Tournament Express 26-35”