• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
28 TE - SS Hull Louver Vents
-
Bluewater
- Gold Member
- Posts: 91
- Joined: Thu May 10, 2012 8:44 am
- Home Port: Burnt Store Marina, Punta Gorda, FL
28 TE - SS Hull Louver Vents
Does anyone have a source for the SS louver vent on the side of the hull below the wheelhouse? External dimensions are 11” x 4.25”.
David
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats
-
Capt Brad
- First Mate
- Posts: 103
- Joined: Sat Jun 24, 2017 11:41 am
- Home Port: Mattapoisett Ma
-
Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: 28 TE - SS Hull Louver Vents
Covered in this thread, read posts from October 19, 2019.
http://www.albinowners.net/aog/viewtopi ... &start=255
Should be Attwood # 1488, but see picture to make sure we are talking about the same part.
http://www.albinowners.net/aog/viewtopi ... &start=255
Should be Attwood # 1488, but see picture to make sure we are talking about the same part.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
Carl
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: 28 TE - SS Hull Louver Vents
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
Bluewater
- Gold Member
- Posts: 91
- Joined: Thu May 10, 2012 8:44 am
- Home Port: Burnt Store Marina, Punta Gorda, FL
Re: 28 TE - SS Hull Louver Vents
Thank you all. My broken one is the smaller one on the hull rather than the upper louver in the wheelhouse support strut. I shall look at both Sea Dog and Atwood. Sunshine is now back in the water with gleaming ( for a 20 year old boat) fiberglass and zincs.
David
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats