If you are into kitchen chemistry see if the white stuff goes back into solution when placed in a glass of sea water. It may be this is residue that has collected over the years as a result of the sea water evaporating during the extended periods of dry land storage.
Are you sure your shaft was bronze and not Monel? To an untrained eye both appear similar but Monel is a special steel alloy that does not corrode in salt water and is stronger and stiffer than stainless.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A27 transmission seal leak part B
-
- Gold Member
- Posts: 645
- Joined: Fri Nov 08, 2013 10:15 pm
- Home Port: Pender Island, BC, Canada
Re: A27 transmission seal leak part B
Hull No. 1013, 1971
-
- Gold Member
- Posts: 199
- Joined: Sun Sep 08, 2019 8:10 pm
- Home Port: Patuxent River, MD
Re: A27 transmission seal leak part B
On the white powder, and these are guesses here:
If there was water flowing over the area, it could be calcium build-up. From diving, most (including non metallic) objects I recover have calcium on them. Vinegar and water would clear it up, but would check the bearing compatibility first.
Shouldn’t be any Aluminum around the shaft, but aluminum oxide is also a fine white powder.
If there was water flowing over the area, it could be calcium build-up. From diving, most (including non metallic) objects I recover have calcium on them. Vinegar and water would clear it up, but would check the bearing compatibility first.
Shouldn’t be any Aluminum around the shaft, but aluminum oxide is also a fine white powder.