Anyone have any info on companies making these windows or have you replaced yours?
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replacing pilot house windows A27 (sliding)
-
Gunny
- Gold Member
- Posts: 74
- Joined: Wed Jan 27, 2010 5:41 pm
- Home Port: Charleston, SC
- Location: Reside in Spartanburg, SC
-
davem554
- Gold Member
- Posts: 15
- Joined: Thu Aug 25, 2016 4:50 pm
- Home Port: Nassau Bay, Tx
Re: Replacing pilot house windows A27 (sliding)
Gunny, I replaced both of mine. I took them out and
Went to a local glass shop. They made two new windows with a slight tint.
Cost about $250.
Went to a local glass shop. They made two new windows with a slight tint.
Cost about $250.
-
sailonset
- Gold Member
- Posts: 54
- Joined: Wed Sep 25, 2019 8:33 pm
- Home Port: Onset, MA
- Location: Onset, MA
- Contact:
Re: Replacing pilot house windows A27 (sliding)
So they are not tempered glass? I couldn't find an etch on ours. I was hoping I could drill holes to mount knobs.
-
PonusNick
- First Mate
- Posts: 38
- Joined: Tue Sep 30, 2014 5:16 pm
- Home Port: Stamford, CT
Re: Replacing pilot house windows A27 (sliding)
Mine are tired and I want to replace them as well. The glass is not an issue as a fellow boater owns a local shop...but I'm struggling with the hardware. Can't find the proper guides and liners...any help?
-
tego
- Gold Member
- Posts: 454
- Joined: Thu May 09, 2013 2:22 pm
- Home Port: Cherokee Resort and Marina - Tellico River near Vonore, TN
- Location: Maryville, TN
Re: Replacing pilot house windows A27 (sliding)
"Defender Industries" has the guide channel strips which you cut to make your frame for the glass. Make sure you get stainless strips. There are plastic ones out there but they don't last long. Ben