• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Geodesic Dinghy
-
- Gold Member
- Posts: 85
- Joined: Fri Aug 03, 2018 9:03 pm
- Home Port: Solon, ME
- Location: Solon, ME
Geodesic Dinghy
Does anybody use, or tried to use, a geodesic dinghy https://www.gaboats.com/ in conjunction with A 25? What is your experience? Thanks for sharing.
Slow Poke A25 #1110
-
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: Geodesic Dinghy
No, but it looks interesting. More like a canoe than a dinghy, but suppose could also be built as a kayak. Would be easy to lift & stow on a hard top roof. Fabric cover over ribs & 'longerons' is more like old timey aircraft construction. Scaled down to 1 inch = 1 foot & the technique might work well to frame up a scale model A25 in balsa & fiberglass. Especially the use of a "strongback" fixture. Someday...
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
- Gold Member
- Posts: 1038
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: Geodesic Dinghy
It looks way to fragile to be used as a dinghy. The Fisher line of aircraft was built like that and were great in the air but any point load would cause trouble. I would consider them more like a novelty than a practical boat. I guess it would be safe up on the roof but even getting in and out of it in some swell and have it contact the swim platform... We are super happy with the Mercury Hypalon 230 dinghy we got last year. We hang it in a reduced size Harbor Men Marine sling and it is actually useful as a ginormous fender when you are getting into a cramped marina...
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
- Gold Member
- Posts: 331
- Joined: Wed Sep 11, 2019 12:10 am
- Home Port: Thousand Islands NY
Re: Geodesic Dinghy
Those are interesting boats with a lot of good qualities, but I too would worry about their durability in rough dinghy service. You might want to look at this thread from the WoodenBoat forum:
http://forum.woodenboat.com/showthread. ... lite-Boats
For our boat, we acquired a Grumman dinghy -- aluminum, and very (83#) light. Designed by Philip Rhodes, they are very well regarded, and they can be sailed, motored, or rowed. It should be durable on rough beaches, or when tied up in "tender scrums" dockside.
Tom
http://forum.woodenboat.com/showthread. ... lite-Boats
For our boat, we acquired a Grumman dinghy -- aluminum, and very (83#) light. Designed by Philip Rhodes, they are very well regarded, and they can be sailed, motored, or rowed. It should be durable on rough beaches, or when tied up in "tender scrums" dockside.
Tom