I own a 36 2002 Albin express trawler twin 330HP yanmar I'll like to know if anyone has any expertise with engine/shaft alignment
Does the boat has to be on the water or if it can be on dry dock. and if on dry dock can it rest on a three point at the keel
Or should I call Albin factory regarding this subject.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
shaft alignment
Moderator: Jeremyvmd
-
pedrofalcon
- Swabby
- Posts: 2
- Joined: Wed Sep 20, 2017 5:37 pm
- Home Port: punta gorda florida
-
jleonard
- Gold Member
- Posts: 2115
- Joined: Fri Sep 22, 2006 7:35 am
- Home Port: Mystic, CT
- Location: New Port Richey, FL
Re: shaft alignment
I definitely MUST be in the water. When on blocks or poppets it does not have it's natural shape.
It is recommended that it be in the water a minimum of approx. 24 hours.
It is recommended that it be in the water a minimum of approx. 24 hours.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
-
SkiTrekker
- Swabby
- Posts: 1
- Joined: Fri Sep 15, 2017 8:00 pm
- Home Port: Sandpoint, ID
Re: shaft alignment
Why are you doing a shaft alignment? I'm curious as to what you felt/saw that lead you to want a shaft alignment. Thanks, trying to learn. Curt
-
pedrofalcon
- Swabby
- Posts: 2
- Joined: Wed Sep 20, 2017 5:37 pm
- Home Port: punta gorda florida
Looking for gage replacement
One of multi purpose gage RPM, Temperature and oil pressure on my 2002 albin express needs to be replaced, the temperature indicator has a needle problem.
I sent the unit to Beede instruments (the manufacturer)for repair but they don't repair it, since Beede was purchased by faria.
Doe anyone knows where this gages can be purchased or repair. Also I spoke with Lauderdale Speedometer, they said those units are sealed units and can't be repaired.
I sent the unit to Beede instruments (the manufacturer)for repair but they don't repair it, since Beede was purchased by faria.
Doe anyone knows where this gages can be purchased or repair. Also I spoke with Lauderdale Speedometer, they said those units are sealed units and can't be repaired.