• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Going to look at an 02 28
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Going to look at an 02 28
As the title says, I’m looking at an 02 28 The tomorrow. Is there anything specific to look for? I’m pretty excited but was hoping to find a thorough check list of what to examine.
Thanks
Thanks
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- Gold Member
- Posts: 252
- Joined: Fri Jul 23, 2010 5:54 pm
- Home Port: Essex, New York
Re: Going to look at an 02 28
Other than the usual things when looking at a used boat purchase, if it has a Yanmar ( and I hope it does, love ours), be sure the exhaust valve seals are the latest design. Not sure the issue pertains to the ‘02 engine models but it’s possible. It was right at the transition phase of the production. Change out of the seals would run you about $1200 or so if you had to have it done.
Don.
Don.
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
Thank you Carol! That’s the info I was looking for. It does have the 315 with 600 hours. Do you know if I can see any of the seals from the oil fill to verify if it’s been done? I know the 2002 was plagued with it too
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
Just got confirmation that the valve job was done In 15
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- Gold Member
- Posts: 165
- Joined: Mon Sep 29, 2014 11:40 pm
- Home Port: Seattle Washington
Re: Going to look at an 02 28
Basic maintenance records would be nice... 600hrs is not a lot of use given the year of the boat. The timing belt is supposed to be changed every 5 years or 1,250 hrs. Original engine? Do a google search on "Yanmar 6lp maintenance schedule" and you'll get an idea of what should have been done based on time/hours.
Anthony
Anthony
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Going to look at an 02 28
Yup, whatever comes first, usually the 5 Years.. The timing belt is supposed to be changed every 5 years or 1,250 hrs.
My timing belt has been changed 3 times, engine has 1050 hours on it.
Ignorant owner is a no-no: I turned down 2 Albin 28TE’s after survey and sea trial because owners had not done the required maintenance and repairs.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
I looked at the boat today. The valves were done and the belt and tensioner in 2015. There was a belt squeal and a couple of minor things but it ran like a champ. Looks like this will be my next boat.
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Going to look at an 02 28
Nice, keep us posted..
Last edited by Norseman on Thu Aug 29, 2019 2:38 pm, edited 1 time in total.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
Offer was accepted. We close in about ten days
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- Gold Member
- Posts: 165
- Joined: Mon Sep 29, 2014 11:40 pm
- Home Port: Seattle Washington
Re: Going to look at an 02 28
Congratulations JKraft!!! Can't wait to hear more details...
Anthony
Anthony
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Going to look at an 02 28
Sounds great and congratulations!
Are you having a survey? Not only is it a really good idea, but it will most likely be required by your insurance company.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
Pitou wrote: ↑Thu Aug 29, 2019 12:05 pmSounds great and congratulations!Jkraft wrote: ↑Wed Aug 28, 2019 10:33 pmI’m actually skipping Survey, I know boats pretty well and have had 14 of them. I also have a survey from 2016 from the owner. I spoke with the insurance company and they said it’s not necessary. But that’s where I am with it for now.
Offer was accepted. We close in about ten days
Are you having a survey? Not only is it a really good idea, but it will most likely be required by your insurance company.
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- Gold Member
- Posts: 521
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Going to look at an 02 28
Jkraft wrote: ↑Thu Aug 29, 2019 1:03 pmPitou wrote: ↑Thu Aug 29, 2019 12:05 pmSounds great and congratulations!Jkraft wrote: ↑Wed Aug 28, 2019 10:33 pm
I’m actually skipping Survey, I know boats pretty well and have had 14 of them. I also have a survey from 2016 from the owner. I spoke with the insurance company and they said it’s not necessary. The boat is so clean and ran so good I just can’t see it. I know it’s still a gamble but I’m feeling confident
Offer was accepted. We close in about ten days
Are you having a survey? Not only is it a really good idea, but it will most likely be required by your insurance company.
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”