• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Having fun refurbishing an Albin 25, was “Catching up on a few years lost maintenance on Driftless”

Albin's "power cruisers"
Post Reply
DesertAlbin736
Gold Member
Gold Member
Posts: 2777
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: Having fun refurbishing an Albin 25, was “Catching up on a few years lost maintenance on Driftless”

Post by DesertAlbin736 »

Leave it to DA to have a source for almost everything Albin A25. Let me rephrase that... EVERYTHING A25!
Thanks for the compliment. If I had been ordering a new cutlass bearing from Albinmotor I would have added the OEM vent caps to the order too. My cutlass bearing seems to be in good shape. Still not 100% sure if the prop shaft & bearing is original Albin 25mm or a 1" replacement from when the repower job to a Yanmar was done in early 1990s. Nothing in the receipts & documentation passed along from previous owners mentions shaft replacement. All I know is there doesn't seem to be any play in the shaft at the cutlass bearing & runs quiet & virtually vibration free.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
Top
Post Reply

Return to “A25 / A27 - True Classics”