Can someone tell me how to close whatever valve fills the bait well? I'm sorry if this is a really dumb question, but we haven't figured that out...! We're ending up with a full bait well that's flowing over into the bilge every time we're out.
Wishing I had a manual
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Bait well
Moderator: Jeremyvmd
-
catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Bait well
Well let's start with what vessel do you have? If you become a supporting member there is a ton of information available to start with in the "Document Library" area. Bait pumps are like wiring a bunch could be done over time. Factory on my 28TE was aft port corner. Two valves one for bait one for washdown. Those were factory locations as well. There is on my 28 a overfill in the top left hand corner with a plastic screen.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal