Help identify my Isuzu in my 1987 27SC

bostonboat · Post by **bostonboat** » Mon Mar 04, 2019 5:55 pm

Hi, this is an ISUZU, It’s currently in my 1987 Albin, trying to verify model #, horsepower and gear reduction. Any help or direction would be greatly appreciated. Thanks !

EF6F80D1-7A03-432C-BEDE-31EEF80520EA.jpeg

Thanks sincerely Scott

EF6F80D1-7A03-432C-BEDE-31EEF80520EA.jpeg

Post by **Jay Knoll** » Mon Mar 04, 2019 6:12 pm

Looks a lot like the Isuzu 6BD1(QD150) on my boat-- there is a manual in the documents section of this forum

bostonboat · Post by **bostonboat** » Mon Mar 04, 2019 7:30 pm

Thanks Jay, is your transmission 2.22 to 1? Also what boat and year do you have ? And what prop are you running on it ? Thanks for your help, I’m trying to figure for a new wheel, I’m only getting about 8/9 knot cruise on it, any info would be greatly appreciated. Here’s my boat

Post by **coolchange** » Tue Mar 05, 2019 11:54 am

second vote for a 157hp

Post by **Jay Knoll** » Wed Mar 06, 2019 8:00 am

bostonboat wrote: ↑Mon Mar 04, 2019 7:30 pm Thanks Jay, is your transmission 2.22 to 1? Also what boat and year do you have ? And what prop are you running on it ? Thanks for your help, I’m trying to figure for a new wheel, I’m only getting about 8/9 knot cruise on it, any info would be greatly appreciated. Here’s my boat

I have an LH 18 x 22 prop, my boat is an 1988 Family Cruiser don't have the transmission information quickly at hand

I generally run at 7 knots, any higher and I"m pulling a huge wake and just burning fuel. I have never seen the 10-12 knot speeds that some owners say they get, I've tried to get the boat over the "hump" but it just won't go, these are semidisplacement hulls after all.

awest · Post by **awest** » Thu May 07, 2020 8:21 pm

Jay Knoll wrote: ↑Mon Mar 04, 2019 6:12 pm Looks a lot like the Isuzu 6BD1(QD150) on my boat-- there is a manual in the documents section of this forum

Good evening I am a brand new member with an Albin 27 sc I also have a Isuzu 6BD1 I was trying to access the manual in the documents section that you mention but it states that I do not have permissions. Any help would be greatly appreciated as I am having some engine issues and need to order parts. Thanks in advance for any help

Albin Owners Group

Albin Owners Group

Help identify my Isuzu in my 1987 27SC

Help identify my Isuzu in my 1987 27SC

Re: Help identify my Isuzu in my 1987 27SC

Re: Help identify my Isuzu in my 1987 27SC

Re: Help identify my Isuzu in my 1987 27SC

Re: Help identify my Isuzu in my 1987 27SC

Re: Help identify my Isuzu in my 1987 27SC