• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 28 TE w/4cyl yanmar
-
apropos346
- Deckhand
- Posts: 8
- Joined: Fri Apr 06, 2018 2:08 pm
- Home Port: n/a
Albin 28 TE w/4cyl yanmar
I'm considering purchasing a '95 Albin 28 TE with 4 cyl yanmar. Does anyone have info on this setup? Max speed, cruising speed and fuel usage? Would the boat be under powered in choppy water with this engine?
-
Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Albin 28 TE w/4cyl yanmar
I think those are pretty rare. I think that one is 170 HP and generally the lowest HP option was the 210 or 250 Cummins which I have. I'm sure the 4 cyl saves some good weight but most of these boats had 250+ hp. If you only want to do low speed (trawler speed), the motor should be great.
1994 TE 28' w/ Cummins 250