• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replace outside faucet in CB 32+2
-
- Gold Member
- Posts: 97
- Joined: Wed Sep 19, 2012 3:08 pm
- Home Port: New Orleans
Replace outside faucet in CB 32+2
The outside sink faucet in our new (to us) CB 32+2 needs replacement. I can't figure out how to gain access to the fixture, because the drawers below are contained in a box below the sink. Has anyone done this before?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
- Gold Member
- Posts: 1906
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Replace outside faucet in CB 32+2
Sounds like the drawer box may need to come out. Similar problem with the galley sink on the 28TE. Either remove the cupboard unit or the fridge to get access.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
-
- Gold Member
- Posts: 31
- Joined: Mon Feb 27, 2012 1:10 am
- Home Port: Santa Barbara, CA
Re: Replace outside faucet in CB 32+2
I recently pulled the storage cabinet on my 32+2. It is a plywood box screwed to two vertical cleats which are screwed to the fiberglass sink/baitwell unit.
Remove the cabinet drawers and you should see screws on the sides near the cabinet front (back of boat). Those closest to the front connect to the starboard trim, the screws about 1 inch deep go to the cleats. The screw sticking out in the photo below goes to the cleat (sorry photos are upside down). Unscrew them then the cabinet comes out as a unit, giving access to the livewell and sink plumbing. My livewell drain was leaking on the cabinet box so it was rotten. Easy rebuild with a 1/4 sheet of plywood, re-using the drawers and starboard pieces.
Alternatively you may be able to pull the metal sink up but I doubt you have enough hose to gain clearance.
Joe
1999 32+2
Remove the cabinet drawers and you should see screws on the sides near the cabinet front (back of boat). Those closest to the front connect to the starboard trim, the screws about 1 inch deep go to the cleats. The screw sticking out in the photo below goes to the cleat (sorry photos are upside down). Unscrew them then the cabinet comes out as a unit, giving access to the livewell and sink plumbing. My livewell drain was leaking on the cabinet box so it was rotten. Easy rebuild with a 1/4 sheet of plywood, re-using the drawers and starboard pieces.
Alternatively you may be able to pull the metal sink up but I doubt you have enough hose to gain clearance.
Joe
1999 32+2
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
-
- Gold Member
- Posts: 97
- Joined: Wed Sep 19, 2012 3:08 pm
- Home Port: New Orleans
Re: Replace outside faucet in CB 32+2
Thanks for the photos. Looks like I need to pull that box out to replace the faucet. I agree there is not going to be enough slack to replace from the top.