Looking for the Exhaust though hall fitting. It's 5" dia and go"s through the port side. Made of plastic
Dose anyone have a Idea of who made them? and where to find them?
2005 Express 28
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Exhaust through hull fitting for express 28 where to find it?
Moderator: Jeremyvmd
-
ROBERTROSSI
- Deckhand
- Posts: 6
- Joined: Wed Jul 27, 2016 11:49 am
- Home Port: westerly RI
- Location: westerly RI
-
Carl
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: Exhaust through hull fitting for express 28 where to find it?
http://www.marineeast.com/a_sch/sch_det ... &pid=08_01
Let us know how the replacement goes, I think the stainless ring was an Albin add on.
Let us know how the replacement goes, I think the stainless ring was an Albin add on.
28TE "Kozy L"
"How U Albin"
"How U Albin"
-
ROBERTROSSI
- Deckhand
- Posts: 6
- Joined: Wed Jul 27, 2016 11:49 am
- Home Port: westerly RI
- Location: westerly RI
Re: Exhaust through hull fitting for express 28 where to find it?
Thank you!! I have look every where for this part.
As far as the stainless ring I have a fab shop.. I just make a new one of them.
When they built this boat they made the hole too large and the two bottom screws did not find the hall
So I'm building up the hole size and re-drilling the screws holes so as they hit the fiberglass.
last year I had a leak and found that the screws where coming out on there own ..
Thanks again..
As far as the stainless ring I have a fab shop.. I just make a new one of them.
When they built this boat they made the hole too large and the two bottom screws did not find the hall
So I'm building up the hole size and re-drilling the screws holes so as they hit the fiberglass.
last year I had a leak and found that the screws where coming out on there own ..
Thanks again..