• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

28TE engine mounts

User avatar
Russell
Gold Member
Gold Member
Posts: 831
Joined: Mon Oct 09, 2006 3:34 pm
Home Port: Stuart, FL
Location: Stuart, FL

Re: 28TE engine mounts

Post by Russell »

I had to pull the engine on my 1997 Albin 28 and the mechanic replaced all the motor mounts and the difference at low RPMs was amazing. It used to rattle the windows and vibrate the floor and after the change it was smoother and quieter. I just bring this up in case there is any doubt about the condition of the rubber in the old mounts. It might be worth it to replace all 4.
Russ
2005 Flush Deck
Honey Girl
Volvo D6-310
Stuart FL
Nancy
Gold Member
Gold Member
Posts: 1908
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: 28TE engine mounts

Post by Nancy »

Russell wrote: Sat Dec 23, 2017 5:50 pm I had to pull the engine on my 1997 Albin 28 and the mechanic replaced all the motor mounts and the difference at low RPMs was amazing. It used to rattle the windows and vibrate the floor and after the change it was smoother and quieter. I just bring this up in case there is any doubt about the condition of the rubber in the old mounts. It might be worth it to replace all 4.
Thanks, Russ! Ours hasn't bad, but it would be nice to get some improvement.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
Post Reply

Return to “Tournament Express 26-35”