• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Zincs at a good price
Moderator: Jeremyvmd
- Russell
- Gold Member
- Posts: 831
- Joined: Mon Oct 09, 2006 3:34 pm
- Home Port: Stuart, FL
- Location: Stuart, FL
Zincs at a good price
I hauled my boat this past weekend to clean the hull and unexpectedly had to purchase new zincs. I was shocked at the prices I had to pay at West Marine so I looked around on the internet and ordered in a supply from this place: http://www.boatzincs.com/ The shaft donut is $13.29 and for those who use the BP129 Vetus bowthruster zinc it is $14.58 compared to $35 at marine stores. I did not know there is a specific zinc for Bennett trim tabs so I ordered one pair at $15.52 to see how they will work. They mount on the two bolts that attach the hydraulic cylinder to the tab. Most people drill a hole and mount a small rudder zinc but it is not necessary with these. I found the 5 inch rudder zincs for $12.84 at http://www.deepblueyachtsupply.com
Russ
2005 Flush Deck
Honey Girl
Volvo D6-310
Stuart FL
2005 Flush Deck
Honey Girl
Volvo D6-310
Stuart FL
- jcollins
- In Memorium
- Posts: 4927
- Joined: Sun Apr 16, 2006 9:05 pm
- Home Port: Baltimore
- Location: Seneca Creek Marina
- Contact: