I have a 1993 28 TE with Peninsular engine. Has anyone changed the water pump in theirs? It appears that you have to take off the heat exchanger and the spacer between pump and engine to access the back bolts but I wanted to verify?
Thanks.
Carl
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Replacing Peninsular Engine Water Pump
-
Froggy
- Gold Member
- Posts: 107
- Joined: Sat May 19, 2007 2:14 pm
- Location: Riverside, RI
-
Neil
- Gold Member
- Posts: 60
- Joined: Sat Nov 14, 2015 6:38 am
- Home Port: Bridgeport CT (Miamogue)
Re: Replacing Peninsular Engine Water Pump
I have not, but we had ours all knocked down to get to the injector pump and I learned something from peninsular. They said to be certain to get the peninsular version of that pump as it is bored out and has a larger impeller than a factory gm version. Which looks and is identical in all other ways.