Bow thruster prop

[BobHaze]

Does anyone know the Vetus part number for a replacement prop for my 50 Kgf bow thruster? I took it off to de-barnacle it, and I managed to drop and break it. I emailed Vetus and they said it's a ST0089, but that item has a 7 9/32" diameter and that's too big. Mine is almost exactly 7" diameter, and the tunnel for it is only a bit more than that. Part of the problem is that Vetus uses different part numbers for their thrusters now: instead of xxx Kgf they're now Bow 35, Bow 50, etc. I could try Defender or Jamestown, but figured I'd try here first.

[Jeremyvmd]

Mine was the pre 98 with the 12mm shaft but this is the same prop I used but with the correct 13.2mm shaft and 7" od for the 98 and later 50kg. I'm assuming this is the one u need
http://www.vetusmarine.com/store/p/63-B ... eller.aspx